Equator 2WD V6-4.0L (2009)
-
Do not allow oil, grease or water to come in contact with the air bag module.
-
For removal/installation of the direct-connect SRS connectors, refer to [Direct connect SRS Component Connectors Description].
INSTALLATION
Original Passenger Air Bag Module
Installation is in the reverse order of removal.
-
For removal/installation of the direct-connect SRS connectors, refer to [Direct-connect SRS Component Connectors Description].
CAUTION:
-
Always work from the side of or under front passenger air bag module.
-
After the work is completed, perform self-diagnosis to check that no malfunction is detected. Refer to [SRS Operation Check].
Service Replacement Passenger Air Bag Module
1. Install the front passenger air bag module to the instrument panel pad assembly.