Equator 2WD V6-4.0L (2009)
Front Seat Belt: Exploded View - King Cab Models
Front Seat Belt: Removal and Installation
REMOVAL OF SEAT BELT RETRACTOR - KING CAB
CAUTION: Before servicing SRS, turn the ignition switch off, disconnect both battery terminals and wait at least three minutes.
1. Disconnect both the negative and positive battery terminals, then wait at least three minutes.
2. Remove the rear door finishers.
3. Remove the retractor anchor bolt, retractor bolt upper, then remove the retractor and belt assembly.
-
On RH side, disconnect the seat belt tension sensor.
4. Disconnect the seat belt pre-tensioner harness connector.
