Equator 2WD V6-4.0L (2009)
^
=> : Vehicle Front
^
-> : Oil pan bolts
CAUTION:
^
Be sure the oil drain plug is located to the rear of the transmission assembly.
^
Before installing oil pan bolts, remove any traces of old sealant from the sealing surfaces and threaded holes.
^
Do not reuse old gasket, replace with a new one.
^
Always replace the oil pan bolts as they are self-sealing.
^
Partially install the oil pan bolts in a criss-cross pattern to prevent dislocation of the gasket.
3) Tighten oil pan bolts in numerical order as shown.
