suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Clutch Disc, M/T|5M/T|Page 2463 > < Clutch Disc, M/T|5M/T|Page 2461
Page 5
background image

Uneven limit of diaphragm spring toe height: Refer to [Service Data and Specifications].

Tool number ST20050240 ( - )

^

Check clutch cover thrust ring for wear or damage. If wear or damage is found, replace clutch cover assembly.

NOTE:
^

Worn thrust ring will generate a beating noise when tapped at the rivet with a hammer.

^

Broken thrust ring will make a clinking sound when cover is shaken up and down.

^

If a trace of burn or discoloration is found on the clutch cover pressure plate to clutch disc contact surface, repair the surface with emery paper.
If surface is damaged or distorted, replace the assembly.

Flywheel

^

Check contact surface of flywheel for slight burns or discoloration. If any are found, repair flywheel with emery paper.

Clutch Disc, M/T|5M/T|Page 2463 > < Clutch Disc, M/T|5M/T|Page 2461