Equator 2WD V6-4.0L (2009)
Clutch Slave Cylinder: Overhaul
Operating Cylinder: Disassembly and Assembly
Operating Cylinder: Disassembly and Assembly
DISASSEMBLY
^
Remove the dust cover, push rod and piston assembly from the cylinder body.
ASSEMBLY
1) Apply rubber lubricant to the cylinder body inner surface and rubber grease to the piston cup and piston.
2) Insert the piston assembly and piston spring into the cylinder body.
3) Apply rubber grease to the dust cover and install the push rod and dust cover.
Operating Cylinder: Inspection
Operating Cylinder: Inspection
INSPECTION AFTER DISASSEMBLY
Inspect for the following, replace parts as necessary.
^
Damage, foreign material, wear, corrosion, and pinholes on the cylinder inner surface, piston, and sliding part of piston cup
^
Weak spring
^
Cracked or deformed dust cover
