Equator 2WD V6-4.0L (2009)
Clutch Release Fork: Service and Repair
5M/T
Clutch Release Mechanism: Removal and Installation
Clutch Release Mechanism: Removal and Installation [5M/T]
REMOVAL
1) Remove the manual transmission from the vehicle.
2) Remove the release bearing sleeve assembly, holder spring, and withdrawal lever from inside the clutch housing.
3) Remove the dust cover.
4) Remove the retainer spring from the withdrawal lever.
5) Remove the release bearing from release bearing sleeve using suitable tool.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
^
Install the release bearing to release bearing sleeve using suitable tool, as shown.
