Equator 2WD V6-4.0L (2009)
2. Fill the front final drive assembly with new differential gear oil until the level reaches the specified level near the filler plug hole.
Differential gear oil grade and capacity : Refer to [Recommended Fluids and Lubricants].
3. Install the filler plug with a new gasket on it to the front final drive assembly. Tighten to the specified torque. Refer to [Front Final Drive:
Disassembly and Assembly].
CAUTION: Do not reuse gasket.
Changing Differential Gear Oil [C200]
Changing Differential Gear Oil [C200]
DRAINING
1. Stop engine.
2. Remove the drain plug from the rear final drive assembly to drain the differential gear oil.