Equator 2WD V6-4.0L (2009)
Seals and Gaskets: Service and Repair
Rear Differential (C200 Type)
Front Oil Seal: Removal and Installation
REMOVAL
1) Remove the propeller shaft.
2) Put matching mark on the end of the drive pinion. The matching mark should be in line with the matching mark A on companion flange.
CAUTION:
For matching mark, use paint. Do not damage drive pinion.
NOTE:
The matching mark A on the final drive companion flange indicates the maximum vertical runout position.
3) Remove the drive pinion lock nut using Tool.