Equator 2WD V6-4.0L (2009)
Seals and Gaskets: Service and Repair
Rear Differential (M226 (ELD) Type)
Front Oil Seal: Removal and Installation
REMOVAL
1) Remove rear propeller shaft.
2) Remove brake calipers and rotors.
3) Measure the total preload torque.
NOTE:
Record the total preload torque measurement.
4) Remove the drive pinion nut using Tool.
Tool number: KV40104000 ( - )
5) Put matching marks on the companion flange and drive pinion using paint.
CAUTION:
Use paint to make the matching marks. Do not damage the companion flange or drive pinion.
6) Remove the companion flange using suitable tool.
