Equator 2WD V6-4.0L (2009)
^
Check the propeller shaft for dents or cracks. If damage is detected, replace the propeller shaft assembly.
INSTALLATION
Installation is in the reverse order of removal.
^
After installation, check for vibration by driving the vehicle.
CAUTION:
Do not reuse the bolts and nuts. Always install new ones.
3S1350 Type
Propeller Shaft: Removal and Installation
COMPONENTS
Model 3S1350
REMOVAL
1) Put the transmission in neutral and release the parking brake.
2) Put matching marks on the rear propeller shaft flange yoke and the rear final drive companion flange as shown.