Equator 2WD V6-4.0L (2009)
1. Connect the harness connector and install the regulator assembly.
a. Loosely install the top rear regulator bolt to use along with the temporary holds on the window motor or manual crank assembly to install the
assembly in the door.
b. Install the top front regulator bolt.
c. Install the bottom regulator bolt.
d. Tighten the top rear regulator bolt.
e. Install the top window motor or manual crank assembly bolt.
f.
Install the lower window motor or manual crank assembly bolt.
g. Install the front window motor or manual crank assembly bolt.
Regulator and motor or manual crank assembly bolts: 7.5 N.m (0.77 kg-m, 66 in-lb)
2. Lower the glass and ensure that it is in both the front and rear glass channels. Tighten glass bolts.
