Esteem L4-1590cc 1.6L SOHC 0 MFI 16V (1995)
OUTPUT VOLTAGE INSPECTION
1. Turn ignition switch "OFF".
2. Hoist vehicle a little.
3. Disconnect connector of wheel speed sensor.
4. Connect voltmeter between connector terminals.
5. While turning wheel at a speed of approximately 2/3 to 1 full rotation per second, check AC voltage of sensor, which should be (29-44 Hz): 150
mV or more If measured voltage is not as specified, check sensor, rotor and their installation conditions.
VISUAL INSPECTION
^
Check sensor for damage.