Esteem L4-1590cc 1.6L SOHC 0 MFI 16V (1995)
6) Pull brake drum off by using 8 mm bolts (2 pcs).
INSTALLATION
1) Before installing brake drum, to maximize brake shoe-to drum clearance, put screwdriver between rod and ratchet and push down ratchet as shown
in figure.
NOTE: Left figure shows ratchet position where brake shoe-to drum clearance is maximum.
2) Put brake shoe hold down spring back to its original position as shown. (Put shoe hold down spring in place by moving shoe lever so that shoe
lever comes to the side of shoe hold down spring.)
3) Install brake drum after making sure that inside of brake drum and brake shoes are free from dirt and oil.
4) Tighten brake drum screws.
5) Upon completion of all jobs, depress brake pedal with about 30 kg (66 lbs) load three to five times so as to obtain proper drum-to-shoe clearance.
Adjust parking brake cable.
6) Install parking brake lever cover.
