suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Idle Speed|Specifications|Page 907 > < Idle Speed|Specifications|Page 905
Page 2
background image

NOTE:
-

Above duty values are ON duty meter indications.

-

Duty values with (*) are applicable to vehicle used at high place (higher than 2,000 m or 6,560 ft).

-

IAC duty can be checked by using analog type voltmeter. IAC duty to voltage relation is as follows:

-

"OFF DUTY METER" is such duty meter that indicates approx. 100% when terminal voltage is approx. "0V".

-

"VB" represents battery voltage while engine of vehicle being checked is running.

7. Remove service wire from monitor coupler.
8. Install cover to relay box.
9. Check that specified engine idle speed is obtained with A/C if vehicle is equipped with A/C. If not, check A/C ON signal circuit and idle air

control system.

Idle Speed|Specifications|Page 907 > < Idle Speed|Specifications|Page 905