Esteem L4-1590cc 1.6L SOHC 0 MFI 16V (1995)
Ignition Cable: Testing and Inspection
1. Remove high-tension cord at ignition coil while gripping its cap.
2. Remove distributor cap installed with high-tension cords.
3. Remove high-tension cord clamp from cylinder head cover.
4. Pull out high-tension cords from spark plugs while gripping each cap.
CAUTION:
-
Removal of high tension cords together with clamps will be recommended so as not to damage their inside wire (resistive conductor).
-
For the same reason, pull out each connection by gripping cap portion.
5. Installation is in the reverse order of removal.
CAUTION:
-
Never attempt to use metal conductor high-tension cords as replacement parts.
-
Insert each cap portion fully when installing high-tension cords.