Esteem L4-1590cc 1.6L SOHC 0 MFI 16V (1995)
Fuel Gauge: Testing and Inspection
Fig. 6 Fuel Level Meter & Gauge Unit Wiring
1. Remove rear seat, then disconnect Yellow/Red lead wire going to gauge unit, Fig. 6.
Fig. 7 Fuel Level Meter Inspection
2. Using a 12 volt (3.4 W) bulb, ground lead wire as shown, Fig. 7.
3. Turn ignition switch On. Ensure bulb is lighted with meter pointer wavering several seconds after.
4. If meter is faulty, replace as necessary.
Fig. 8 Gauge Unit Float Position-to-Resistance Chart
5. Using an ohmmeter, ensure resistance of level gauge unit changes with a change of float position, Fig. 8.