suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Spark Plug Wire Set - Driveability Problems|Page 1278 > < Spark Plug Wire Set - Driveability Problems
Page 2
background image

VIN range:

2S3TC02C_S6400001 - 2S3TC02C_S6413715

Note:

1) 1994 2-door Sidekick, Federal Specification (E3) and 1995 2-door Sidekick, 2 wheel drive, Federal Specification (E3) are not involved. These

vehicles are not equipped with the 16 valve, 1.6 liter engine.

2) California Specification (E33) vehicles may be found in California, New York, Massachusetts, and surrounding states.

Inspection Procedures:

1)

Raise hood and secure with hood prop rod.

2)

Look at the side of the spark plug boot top.

If one or more of the spark plug high tension wires are the old style, proceed to the Service Procedures.

Service Procedures:

1)

Remove the spark plug wire high tension wire separator clamps.

2)

Disconnect spark plug number 1 high tension wire by gripping its cap and spark plug boot.

3)

Install spark plug number 1 high tension wire by inserting the cap portion fully into the distributor cap and the boot fully onto the spark plug.

4)

Repeat for the remaining three (3) spark plug high tension wires.

5)

Reinstall the spark plug wire high tension wire separator clamps.

6)

Start engine and check for proper engine operation.

Spark Plug Wire Set - Driveability Problems|Page 1278 > < Spark Plug Wire Set - Driveability Problems