Esteem L4-1590cc 1.6L SOHC 0 MFI 16V (1995)
Power Steering Pump: Service and Repair
Removal and Installation
Fig. 28 Power Steering Pump Components
1. Remove engine right side undercover, then loosen belt tension pulley to remove power steering belt, Fig. 28.
2. Disconnect high pressure hose and suction hose from pump.
3. Disconnect pressure switch lead harness.
4. On models with A/C, remove compressor and position aside.
5. Remove power steering pump and bracket.
6. Reverse procedure to install. Tighten to specification.
