Esteem L4-1590cc 1.6L SOHC 0 MFI 16V (1995)
PARTS MODIFICATION
SERVICING
The EARLY style spindle caps can be reused as long as the installation procedures listed below are performed on the vehicle.
1.
Remove the spindle cap and clean the mating surfaces on both the cap and the rear wheel hub.
2.
Apply a very thin coating of black silicon sealant (Suzuki p/n 99104-31140) evenly to the spindle cap mating surface, as shown above.
3.
Install the spindle cap to the rear wheel hub. Make sure that the sealant does not enter the inside of the cap.
PARTS SUPPLY DATA
