Esteem L4-1590cc 1.6L SOHC 0 MFI 16V (1995)
Drive gears and driven gears are different in thickness as listed.
If side clearance of the thickest gear is out of specification, replace oil pump body or assembly and stator shaft subassembly.
ASSEMBLY
1. Install pump body oil seal. Use Special Tool (A): 09944-66020, or equivalent and hammer to install it, and then apply grease to its lip portion.
2. Install driven gear and drive gear to pump body after applying fluid to gears.
3. Install stator shaft subassembly to pump body and tighten eight torx bolts to specification.
Tightening Torque (a): 12 Nm (108 inch lbs.)
NOTE: Be sure to tighten bolts alternately and uniformly.
