Esteem L4-1590cc 1.6L SOHC 0 MFI 16V (1995)
On Lift
1. Disconnect gear shift control shaft from gear shift control lever by removing control shaft bolt and nut.
2. Remove 4 guide plate bolts and loosen extension rod nut at transmission end and then move extension rod aside.
In Cabin
1. Remove shift control lever cover by removing 4 screws.
2. Remove 4 control lever housing nuts and then push shift control lever boot(s) into floor hole to take out shift control lever assembly from under
the floor.
On Bench
1. Holding control lever knob with soft jawed vise, loosen its screw and remove control lever.
2. Remove 2 housing nuts, and then disassemble control lever.
INSTALLATION
1. Assemble control lever by reversing removal procedure, replacing parts with new ones as required. Select shim for adjusting vertical play of
control lever, if necessary.
Apply grease to turning or sliding portions.