Esteem L4-1590cc 1.6L SOHC 0 MFI 16V (1995)
NOTE: Check control lever for smooth movement after assembly.
2. Apply thread lock cement and then install knob to control lever. Make sure that knob is aligned with lever.
3. Install control lever assembly and related parts as they were. For positioning control lever, loosely install 4 guide plate bolts and 4 control lever
housing nuts first, adjust position and then tighten those nuts and bolts.
NOTE:
^
Do not apply grease to extension rod bush of transmission end.
^
Apply grease to gear shift control shaft bushes.
^
Make sure that boots are installed correctly.
Distance "a": 137 mm (5.4 inch)