Esteem GL Wagon L4-1.6L (1998)
4) Remove reservoir pin or bolt. Use special tool for pin removal.
Special Tool
(A): 09922-85811
5) Remove reservoir.
CAUTION: Brake fluid is extremely damaging to paint. Do not allow brake fluid to get on painted surfaces.
INSTALLATION
1) When using new grommets, lubricate them with the same fluid as the one to fill reservoir with. Then press-fit grommets to master cylinder.
Grommets must be seated in place.
2) Install reservoir on master cylinder with pin or bolt.
NOTE: When inserting pin, drive till both of its ends at the right and left of reservoir become the same length.
3) Install EVAP canister to its bracket, if removed.
4) Connect reservoir lead wire.
5) Fill reservoir with specified fluid.
6) Upon completion of installation, check for fluid leakage.
