Esteem GL Wagon L4-1.6L (1998)
NOTE: Check to make sure that ABS wheel speed sensor tooth is free from any metal particles.
3. Connect tie-rod end to knuckle and tighten tie-rod end castle nut to specified torque. Install new split pin.
4. For installation procedures following the above. Refer to Transmission and Drivetrain.
Tightening torque:
(a): 50 Nm (36.5 ft. lbs.)
(b): 28 Nm (20.5 ft. lbs.)
(c): 45 Nm (33.0 ft. lbs.)
(d): 60 Nm (43.5 ft. lbs.)
(e): 90 Nm (65.0 ft. lbs.)