Esteem GL Wagon L4-1.8L (1999)
Air Bag Warning Lamp: Testing and Inspection
61 - Air Bag Warning Lamp Circuit Failure
CAUTION:
-
When measurements are requested in this table use specified digital multimeter with correct terminal adapter from special tool (Connector test
adapter kit).
-
When a check for proper connection is requested refer to INTERMITTENT AND POOR CONNECTIONS in this section.
-
When an open in air bag wire harness, damaged wire harness, connector or terminal is found, replace wire harness, connectors and terminals as an
assembly.
DTC WILL SET WHEN:
The output voltage at the "AIR BAG" warning lamp circuit terminal "Q06-12" does not match the commanded state of the warning lamp driver for
specified time.
DTC 61 (Step 1)
DTC TABLE DESCRIPTION:
Number(s) below refer to circled number(s) on the diagnostic table.
1. This test rechecks whether an abnormality is in SDM or in "AIR BAG" warning lamp circuitry.