Esteem GL Wagon L4-1.8L (1999)
Technical Service Bulletin # TS03-01
Date: 001127
Steering - Steering Gear Squeaking Noise
TSB No. TS 03-01 11270
Section Title: Steering
Division: Automotive
Category: Technical
SUBJECT:
SQUEAKING NOISE FROM STEERING GEAR
MODEL:
ESTEEM (SY)
YEAR:
1995-1999
CONDITION:
A condition may exist that an audible squeaking noise is heard from the top of the Rack & Pinion when the steering wheel is turned.
CAUSE:
Friction between the pinion shaft and oil seals.
CORRECTION:
Install Oil Seal Kit (p/n 48530-64810) and use Multi-purpose Wheel Bearing Grease # 2 grade during reassembly.
AFFECTED VEHICLES:
This procedure applies to 1995-1998 and some 1999 Esteem (SY) models.
Esteem Sedan
~JS2GB31S_X5165606
~JS2GB41S_X5161244
Esteem Wagon
~JS2GB31W_X5164490
~JS2GB41W_X5161373
Refer to this bulletin for visual identification.
REQUIRED PARTS:
Seal Set, Pinion Gear
48530-64810
qty 1
Multi-purpose Wheel Bearing Grease # 2 grade
Permatex 80019, Liquid gasket Three Bond 1102 or equivalent
Permatex 90062, Liquid gasket Three Bond 1105 or equivalent
SPECIAL TOOLS:
09943-86010
Pinion bearing remover & installer
09943-86020
Pinion oil seal protector
SERVICE TOOLS:
Press Tool
Vise
OIL SEAL REPLACEMENT FOR SY MODEL POWER STEERING ASSEMBLIES
APPLICABLE POWER STEERING ASSEMBLIES
The affected power steering gears will no longer be replaced as assemblies. In the event a vehicle requires repair for the following condition, the repair
will be limited to replacing the pinion oil seal, stub oil seal, and retaining ring.