Esteem GL Wagon L4-1.8L (1999)
12.
If a shim was removed during Steps of Disassembly, place it between the valve housing and steering shaft body.
13.
Apply Multi-purpose Wheel Bearing Grease # 2 grade to the bearing of the valve housing assembly and pinion gear. Install valve housing into
steering shaft body.
SERVICE MATERIAL:
Multi-purpose Wheel Bearing Grease # 2 grade
14.
Alternately tighten the 2 bolts securing the valve housing to the steering shaft body.
TIGHTENING TORQUE:
19.6-29.4 Nm (14.5-21.5 lbs.ft.)
15.
Make sure the steering is in a condition to go straight (centered), by turning the input shaft of the valve housing.
16.
Apply liquid gasket Three Bond 1102 or equivalent on 1/3 of the threads on the plunger.
SERVICE MATERIAL: