Esteem GL Wagon L4-1.8L (1999)
6. Install bearing strut support and strut nut in this sequence. Tighten strut nut to specified torque and then apply waterproof coating (paint or
lacquer) all around nut and strut rod thread.
Tightening Torque (a): 65 Nm (6.5 kg-m, 47.0 ft. lbs.)
7. Loosen and remove special tool (A) compressing coil spring. While loosening special tool, recheck that stepped part of spring seat and spring end
are in place to each other as described in foregoing Step 2.
INSTALLATION
1. Install strut assembly by reversing REMOVAL Steps 1 - 7. Insert bolts in such a direction as shown.
