Workshop Repair Manuals

Suzuki Workshop Manuals

[NEXT PAGE]

suzuki Workshop Repair Guides


Esteem GLX L4-1.6L (1997)

Relays and Modules > Relays and Modules - Brakes and Traction Control > ABS Fail-Safe Relay <--> [ABS Main Relay] > Component Information > Testing and Inspection > ABS Fail-Safe Relay

Page 1
background image

ABS Fail-Safe Relay: Testing and Inspection
ABS Fail-Safe Relay

INSPECTION 

1) Disconnect negative cable from battery. 
2) Remove fail-safe relay from relay box. 

3) Check resistance between each two terminals.

Between "1" and "3": 78 - 96 ohms at 20°C, 68°F
Between "2" and "5": Continuity
Between "4" and "5": No continuity

4) Check that there is continuity between terminals "4" and "5" when battery is connected to terminals "1" and "3".

If check result is not as specified in Step 3) and 4), replace.

Relays and Modules > Relays and Modules - Brakes and Traction Control > ABS Fail-Safe Relay <--> [ABS Main Relay] > Component Information > Testing and Inspection > ABS Fail-Safe Relay

[NEXT PAGE]