Esteem GLX L4-1.6L (1997)
5. Using Special Tool (A): 09926-98310, or equivalent, and hydraulic press, compress overdrive clutch return spring and install snap ring.
NOTE:
^
When installing return spring, be careful so that return spring will not fall or tilt.
^
Do not align opening in snap ring with lug of overdrive clutch return spring at its retainer section.
CAUTION: Be careful when applying pressure, for overpressure will cause plate section of spring to deform.
6. Select and measure correct thickness of coast clutch flange
Available clutch flange size (thickness)
3.6 mm (0.142 inch)
3.8 mm (0.150 inch)
4.0 mm (0.157 inch)
7. Install flanges, discs and plate of coast clutch in following order. (1) Flange -> (2) Disc -> (3) Plate -> (4) Disc -> (5) Flange.
NOTE: Be sure to confirm that flat section of flange (5) selected in Step 6 faces toward piston side and also that flange (1) faces toward upper
side.
8. Install snap ring.
NOTE: Check to make sure that opening end of ring is not aligned with groove section of drum.
