suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Cruise Control Servo Cable|Service and Repair|Page 4262 > < Cruise Control Servo|Service and Repair
Page 1
background image

Cruise Control Servo Cable: Service and Repair

CRUISE CABLE 

Cable Play Inspection and Adjustment 

1) Remove actuator cap.
2) With actuator lever returned at original position (Where lever does not move clockwise any further), check cruise cable for play.

Cable play "a" : 1-2 mm (0.04-0.08 in.) 

If it is out of specification, adjust it as follows

3) Loosen cable lock nut.
4) Adjust cable play to specified value by turning adjusting nut.
5) Tighten lock nut securely after adjustment.

Removal 

1) Disconnect cruise cable from cruise control arm and accelerator bracket.

Cruise Control Servo Cable|Service and Repair|Page 4262 > < Cruise Control Servo|Service and Repair