suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Power Steering Pressure Switch > < Heated Oxygen Sensor Heater Control System|Page 1869
Page 1
background image

Power Steering Pressure Signal: Description and Operation

Power Steering Pressure Signal (Vehicle with Power Steering System Only) 

This signal is sent from the power steering pressure switch. The power steering pressure switch is installed on the power steering pump body.
The switch turns ON when the oil pressure is higher than 3500-500 kPa (35-45 kg-cm2, 215-285 psi).
The turning of the steering wheel causes oil pressure to increase. ECM uses it for controlling idle air control valve.

Power Steering Pressure Switch > < Heated Oxygen Sensor Heater Control System|Page 1869