suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Emissions - Refuel Vapor Control Valve Damaged/MIL ON|Page 1655 > < Emissions - Refuel Vapor Control Valve Damaged/MIL ON|Page 1653
Page 9
background image

22.

Connect the pipe joints to each pipe (Figure 19).

CAUTION:

When connecting joint, clean outside surfaces of pipe, push joint into pipe until joint lock clicks and check to ensure that pipes are connected
securely, or a fuel leak may occur.

23.

Connect the EVAP canister air valve connectors. Connect vapor control valve hose and purge hose to EVAP canister. For the quick connector
push joint into pipe until joint lock clicks (Figure 20).

24.

Install the muffler and tighten the muffler nuts (Figure 21).

Emissions - Refuel Vapor Control Valve Damaged/MIL ON|Page 1655 > < Emissions - Refuel Vapor Control Valve Damaged/MIL ON|Page 1653