Esteem GLX Sedan Plus L4-1.8L (1999)
DISASSEMBLY
1. Clean its exterior thoroughly.
2. With aluminum plates placed on vise first, grip pump body with it.
3. Remove suction connector bolt, suction connector and O-ring from pump body.
4. Remove power steering pressure switch (terminal set) from pump body.
5. Remove plug, flow control spring and relief valve (flow control valve) from pump body.
6. Remove cover bolts, pump cover and O-ring from pump body.
7. Remove snap ring from pump shaft.
8. Remove vanes from rotor.
9. Remove cam ring, rotor, side plate and O-rings from pump body.
10. Pull out pulley from pump body.
11. Remove oil seal from pump body.
INSPECTION
Pump Body, Cover, Side Plate and Shaft
Check sliding surfaces of each part for wear and damage. If any defect is found, replace pump assembly.
Cam Ring
