Esteem GLX Sedan Plus L4-1.8L (1999)
14. Match the dowel pins to the holes of the cover plate as shown and install pump cover to pump body.
15. Gradually tighten pump cover bolts to specified torque.
NOTE: After installing pump cover, check to make sure that shaft can be turned by hand.
Tightening Torque (a): 28 Nm (2.8 kg-m, 20.0 ft. lbs.)
16. Apply power steering fluid to O-ring of terminal switch.
17. Install pressure switch to pump body.
Tightening Torque (b): 28 Nm (2.8 kg-m, 20.0 ft. lbs.)
18. Apply power steering fluid to relief valve (flow control valve).
19. Install relief valve (flow control valve) to pump body.
20. Install flow control spring.
21. Apply power steering fluid to O-rings of plug.
22. Install O-rings to plug.