Esteem GLX Sedan Plus L4-1.8L (1999)
8. Remove engine rear mounting together with its bracket from engine and member.
9. Detach mounting member from suspension frame.
10. Remove exhaust pipe rear stiffener (For 1.8 liter model).
11. Remove engine rear mounting bracket No.2 with engine rear mounting bracket from engine block and transmission case (For 1.8 liter model).
12. Disconnect high and low pressure pipes from steering gear box, using flare nut wrench.
NOTE: As fluid flows out of disconnected joints, have a container under joints or a plug to pipe.
13. Remove steering gear box mounting bolts and then remove steering gear box from vehicle.
INSTALLATION
Reverse removal procedure for installation of steering gear box noting following points.
CAUTION: Be sure to confirm that steering wheel and front tires (wheels) are in straight position when inserting steering lower joint into steering
pinion shaft.
^
If a plug was put to disconnected pipe when removing steering gear box, remove that plug before reconnecting pipe.
