Esteem GLX Sedan Plus L4-1.8L (1999)
Wheel Fastener: Service and Repair
Rear
REMOVE AND INSTALL WHEEL HUB (WHEEL BEARING) ASSEMBLY AND WHEEL STUD (HUB BOLT)
NOTE: Wheel bearing and wheel hub form a solid unit. When wheel bearing is found defective and its replacement is necessary, replace hub
assembly.
REMOVAL
1. Hoist vehicle and remove brake disc.
2. Remove spindle cap as shown (by hammering lightly at 3 locations around it so as not to deform or cause damage to seating part of cap).
3. Uncalk spindle nut and remove spindle nut and washer.
4. Pull wheel hub off by using special tools.
Special Tool
(A): 09943-17912
(B): 09942-15510
5. Remove hub bolts.