Esteem GLX Wagon L4-1.8L (1999)
8. Remove suspension frame bolts and suspension frame.
INSTALLATION
1. Install suspension frame and tighten suspension frame bolts to specified torque.
Tightening Torque (a): 90 Nm (9.0 kg-m, 65.0 ft. lbs.)
2. Install control rods referring to steps 1 and 2 of CONTROL ROD INSTALLATION. See: Steering and Suspension/Suspension/Lateral Stabilizer
Rod
3. For vehicles equipped with ABS, attach ABS wheel speed sensor connector and harness (right and left) to suspension frame and control rods.
4. Perform steps 4 to 9 of CONTROL ROD INSTALLATION. See: Steering and Suspension/Suspension/Lateral Stabilizer Rod
5. Install muffler.
