suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Body and Frame|Seats > < Sunroof / Moonroof Switch|Testing and Inspection
Page 1
background image

Sunroof / Moonroof Gear Assembly: Testing and Inspection

SLIDING ROOF DRIVE GEAR ASSY 

1. Disconnect sliding roof drive gear assy coupler.
2. Connect (+) battery lead to terminal a and (-) battery lead to terminal b and check that the motor turns to the left (close/up direction).
3. Reverse polarity (connect (-) battery lead to terminal a and (+) battery lead to terminal b) and check that the motor turns to the right (open/down

direction).

4. If motor does not operate as above 2. and 3. replace it.

Inspection for noise-protection ground 

1. Check that the continuity exists between terminal c and the body of motor.

Body and Frame|Seats > < Sunroof / Moonroof Switch|Testing and Inspection