suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Hydraulic Control Assembly - Antilock Brakes|Specifications|Page 2454 > < Hydraulic Control Assembly - Antilock Brakes|Specifications|Page 2452
Page 2
background image

^

Operation sound of solenoid is heard and wheel turns only about 0.5 sec. (Brake force is depressurized).

^

Operation sound of pump motor is heard and pulsation is felt at brake pedal.

10. If all 4-wheels cannot be checked during one ignition cycle (OFF -> ON), repeat Step 8) and 9) till all 4 wheels are checked. If a faulty condition is

found in Steps 9) and 10), replace hydraulic unit.

11. Turn ignition switch "OFF" and remove service wire from DIAG.-2 connector.

Hydraulic Control Assembly - Antilock Brakes|Specifications|Page 2454 > < Hydraulic Control Assembly - Antilock Brakes|Specifications|Page 2452