Esteem GLX Wagon L4-1.8L (1999)
Backing Plate: Service and Repair
REMOVAL
1. Perform steps 1) to 6) of BRAKE DRUM REMOVAL.
2. Remove spindle cap as shown (by hammering lightly at 3 locations around it so as not to deform or cause damage to seating part of cap).
3. Uncalk spindle nut and remove spindle nut and washer.
4. Pull wheel hub off by using special tools.
Special Tools
(A): 09943-17912
(B): 09942-15510
5. Perform steps 2) to 4) of BRAKE SHOE REMOVAL.
6. Perform steps 3) and 4) of WHEEL CYLINDER REMOVAL.
7. Remove cable from brake back plate by squeezing parking brake cable stopper ring.
