suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Technician Safety Information|Page 2590 > < Technician Safety Information|Page 2588
Page 1
background image

Brake Fluid: Testing and Inspection

Brake Fluid Inspection

1. Check around master cylinder and reservoir for fluid leakage. If found leaky, correct.

2. Check fluid level.

If fluid level is lower than the minimum level of reservoir, refilling is necessary. Fill reservoir with specified brake fluid.

Brake fluid: Refer to reservoir tank cap.

For the details, refer to ON-VEHICLE SERVICE.

CAUTION:  Since brake system of this vehicle is factory-filled with brake fluid indicated on reservoir tank cap, do not use or mix different type
of fluid when refilling; otherwise serious damage will occur.

Do not use old or used brake fluid, or any fluid from a unsealed container.

Technician Safety Information|Page 2590 > < Technician Safety Information|Page 2588