Esteem GLX Wagon L4-1.8L (1999)
1. Set special tool (A) on master cylinder and push pin until contacts piston.
Special Tool (A): 09950-96010
Turn special tool upside down and place it on booster. Adjust booster piston rod length until rod end contacts pin head.
Special Tool (A): 09950-96010
Clearance "b": 0 mm (0 inch)
NOTE: Take measurement with booster set vertically or with supporting piston rod by special tool (09952-16010) so as to piston rod placed at
the center.
2. Adjust clearance by turning adjusting screw of piston rod.
Special Tool (B): 09952-16010
For Vehicle Equipped with ABS
1. Remove piston rod seal from booster.
2. Measure depth of piston rod, i.e. distance between piston rod and mating surface of booster-to-master cylinder.
Depth of piston rod "c": 9.63 - 9.87 mm (0.38 - 0.39 inch)
