Esteem GLX Wagon L4-1.8L (1999)
2. Tighten booster attaching nuts to the specified torque.
Tightening Torque (a): 13 Nm (1.3 kg.m, 9.5 ft. lbs.)
3. Connect brake vacuum hose to brake booster.
4. Set push rod seal to master cylinder and set push rod sleeve to brake booster (if equipped). Install master cylinder.
CAUTION: Face flat part of push rod sleeve to seal side, or it may cause vacuum leak.
5. After installing, check (refer to BRAKE MASTER CYLINDER CHECK).
