Esteem GLX Wagon L4-1.8L (1999)
Cruise Control Switch: Service and Repair
These switches are built in the combination switch assembly.
CAUTION: Never disassemble combination switch will spoil its original functions.
CONTACT COIL AND COMBINATION SWITCH ASSEMBLY
CAUTION: Do not turn contact coil (on combination switch) more than allowable number of turns (about two and a half turns from the center
position clockwise or counterclockwise respectively), or coil will break.
REMOVAL
1. Disconnect negative battery cable at battery terminal.
2. Disable air bag system. Refer to Restraint Systems.
3. Remove steering wheel from steering column shaft.
4. Remove hole cover and knee bolster panel.
5. Remove steering column cover screws (3 pcs).
6. Separate upper cover and lower cover, then remove them.
7. Loosen clamp.
8. Remove band binding steering column and harness (for contact coil and combination switch assembly).
9. Disconnect yellow connector (for air bag) and white connector (for auto cruise, optional).
