suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Oil Filter, Engine|Service and Repair|Page 958 > < Engine Oil|Capacity Specifications|Page 954
Page 1
background image

Oil Filter: Service and Repair

Engine Oil and Filter Change

WARNING:  New and used engine oil can be hazardous.
Be sure to read "WARNING" in General Precaution and observe what in written there.

Use only engine oil with American Petroleum Institute (API) Certified For Gasoline Engines "Starburst" symbol.

Select the appropriate oil viscosity according to the chart. If is highly recommended to use SAE 5W-30 oil.

However, SAE 10W-30 oil is usable for ambient temperatures above - 18 °C (0 °F).

Before draining engine oil, check engine for oil leakage. If any evidence of leakage is found, make sure to correct defective part before proceeding to the
following work.

1. Drain engine oil by removing drain plug.
2. After draining oil, wipe drain plug clean. Reinstall drain plug, and tighten it securely as specified below.

Tightening Torque
(a): 35 N.m (3.5 kg-m, 25.5 lb-ft)

Oil Filter, Engine|Service and Repair|Page 958 > < Engine Oil|Capacity Specifications|Page 954