suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Oil Pan, Engine > < Oil Filter, Engine|Service and Repair|Page 958
Page 3
background image

7. Replenish oil until oil level is brought to FULL level mark on dipstick. Filler inlet is at the top of cylinder head cover.
8. Start engine and run it for three minutes. Stop it and wait another 3 minutes before checking oil level. Add oil, as necessary, to bring oil level to

FULL level mark on dipstick.

Engine Oil Capacity

NOTE:  Engine oil capacity is specified in table. However, note that amount of oil required when actually changing oil may somewhat differ from
data in the table depending on various conditions (temperature, viscosity, etc.).

9. Check oil filter and drain plug for oil leakage.

Oil Pan, Engine > < Oil Filter, Engine|Service and Repair|Page 958