Esteem GLX Wagon L4-1.8L (1999)
5. Install 1st timing chain by aligning dark blue plate of 1st timing chain and match mark on idler sprocket.
6. Bring yellow plate of 1st timing chain into match with match marks on crankshaft timing sprocket.
7. Install timing chain tensioner as shown in figure.
Tightening Torque (a): 25 Nm (2.5 kg-m, 18.0 ft. lbs.)
8. With latch of tensioner adjuster No.1 returned and plunger pushed back into body, insert stopper into latch and body. After inserting it, check to
make sure that plunger will not come out.
