Esteem GLX Wagon L4-1.8L (1999)
^
Arrow mark on idler sprocket (II) points upward.
^
Marks on sprockets (III) match with marks on cylinder head. Note that this step must be followed for reinstallation of timing chain.
8. Remove timing chain tensioner adjuster No.2 and gasket. To remove them, slacken 2nd timing chain by turning intake camshaft counterclockwise
a little while pushing back pad.
9. Remove intake and exhaust camshaft timing sprocket bolts.
To remove them, fit a spanner to hexagonal part at the center of camshaft to hold it stationary.
10. Remove camshaft timing sprockets and 2nd timing chain.
CAUTION: After 2nd timing chain is removed, never turn Intake camshaft, exhaust camshaft and crankshaft independently more than such an
