Esteem GLX Wagon L4-1.8L (1999)
Condenser HVAC: Service and Repair
CONDENSER
REMOVAL
1. Disconnect negative (-) cable at battery.
2. Recover refrigerant by using recovery and recycling equipment. Be sure to follow the instruction manual for the equipment. The amount of
compressor oil removed must be measured and the same amount added to the system.
3. Remove front bumper.
4. Disconnect compressor delivery hose from condenser inlet fittings.
NOTE: As soon as above hose and pipe are disconnected, cap opened fittings so that moisture and dust do not enter condenser.
5. Remove horn.
6. Remove hood latch and hood lock member.
7. Disconnect coupler from dual pressure switch.
8. Remove receiver outlet pipe.
